How to Remove Chip from HP Toner Cartridge

 

Currently, the HP 158A, HP 158X, HP 108A, HP W9040, HP W9050, HP W9210, and HP W9220 are some of the most popular HP toner cartridges available. OEM cartridges can be pricey, so many users opt for compatible versions. These come in two types: With-Chip and No-Chip. The No-Chip versions are cheaper, but they require users to transfer the chip from the original cartridge. While this can be tricky for some, specially designed tools make the process easier for most people.

Removing the chip from an HP toner cartridge can help you save money and use compatible cartridges. This guide will walk you through the process step-by-step.

Why Remove the Chip?

HP toner cartridges have chips that monitor toner levels and authenticate the cartridge. Removing and transferring the chip allows you to use compatible cartridges, which are often more affordable.

Tools Needed:

• Diagonal cutting pliers
• Tweezers
• Small flathead screwdriver
• Chip removal tool (for glued chips)            
  
                                (Image from https://ybtoner.com）

Steps for Removing Non-Glued Chips:

1. Preparation:

   • Place the HP toner cartridge on a flat, stable surface.
   • Ensure you have good lighting to see the chip clearly.

2. Locate the Chip:

   • The chip is usually found on the side of the toner cartridge.

3. Cutting the Slot:

   • Carefully use the diagonal cutting pliers to cut around the chip slot. Be gentle to avoid damaging the chip.

4. Extracting the Chip:

   • Once exposed, use the tweezers to gently lift and remove the chip. Handle the chip by its edges to avoid static damage.

                                            （Image from https://ybtoner.com）

 

Steps for Removing Glued Chips:

1. Preparation:

   • Place the cartridge on a flat surface and gather your tools.

2. Aligning the Tool:

   • Position the chip removal tool over the chip. If you don’t have a chip removal tool, a small flathead screwdriver can work.

3. Using the Tool:

   • Apply gentle pressure and carefully wiggle the tool to loosen the glue. Be patient and avoid using excessive force.

4. Extracting the Chip:

   • Once the chip is loosened, use tweezers to lift it out. Be cautious not to scratch the chip.

5. Cleaning Up:

   • Trim any excess plastic or glue residue around the chip slot with the diagonal cutting pliers. This will ensure the chip fits properly in the new cartridge.

                                         （Image from https://ybtoner.com）

Reinstalling the Chip:

1. Align the Chip:

   • Place the chip in the corresponding slot on the compatible toner cartridge. Ensure it is properly aligned.

2. Securing the Chip:

   • Press the chip gently to secure it in place. If needed, use a small amount of non-conductive adhesive to keep it stable.

3. Testing:

   • Install the toner cartridge in your printer and perform a test print to ensure the chip is functioning correctly.

Conclusion: By following these steps, you can easily transfer the chip from your original HP toner cartridge to a compatible one. This process allows you to save money while maintaining the functionality of your printer. For more detailed instructions and additional resources, visit the evate-tech.com.