If you’re looking to replace or reset the chip on your HP toner cartridge, our new video tutorial is here to help. This step-by-step guide simplifies the process, ensuring you can handle it with ease.
Step-by-Step Process:
1. Preparation
- Gather necessary tools: a small screwdriver, tweezers, and a new chip.
- Make sure you have a clean, well-lit workspace.
2. Remove the Old Chip
- Turn off the printer and unplug it for safety.
- Open the toner compartment and carefully remove the toner cartridge.
- Locate the chip on the cartridge; it’s usually on the side or bottom.
- Use the screwdriver to gently pry off the old chip. Be cautious not to damage the surrounding area.
3. Install the New Chip
- Take the new chip and align it with the slot on the toner cartridge.
- Press the chip firmly into place until it clicks.
- Reinsert the toner cartridge back into the printer.
4. Test the Installation
- Power on the printer and run a test print to ensure the chip is recognized and functioning correctly.
Watch Our Video Tutorial
For a detailed visual guide, watch our video on "HP Chip Removal and Installation." This video provides clear, step-by-step instructions, making the process even easier to follow. Click below to watch the tutorial: